Turean Polyurea Garage Floor Coating Kit (2-Component Polyaspartic Polyurea)

Overview

Turean Polyurea Floor Coating Kit (Garage) is a two-component polyaspartic polyurea coating that cures into a seamless, durable floor finish. It’s recommended for garage floors and driveways, as well as workshops and light industrial floors, delivering a surface that’s designed to be easy to clean when installed over a properly prepared substrate.

Key Benefits

• UV & weather resistant (suitable for exposed areas depending on system design)

• Creates a seamless, crack-resistant membrane

• Strong adhesion on properly prepared substrates

• Durable, easy-to-clean finish for daily-use floors

Recommended Uses

• Garage floors & driveways

• Workshops & light industrial floors

• Projects requiring a durable, easy-clean coating finish

Mix Ratio

• 1:1 by weight (Part A : Part B)

• Measure accurately and mix thoroughly until uniform

• Do not allow settling after mixing

Application (Quick Directions)

1. Surface prep: grind/clean; remove dust & loose material; substrate must be dry

2. Apply sealing primer: wait 6–8 hours

3. Apply coating by roller / squeegee

   • Reference usage: ~0.6 mm ≈ 0.8 kg/m² (depending on substrate)

Important Notes

• No foot traffic within 48 hours

• Allow at least 7 days before full service

• If viscosity increases, add manufacturer-approved thinner (max 5–10%)

Storage & Shelf Life

• Store cool, dry, ventilated; recommended 0–30°C (32–86°F)

• Shelf life: 12 months (unopened)

What’s in the Kit

• Part A + Part B (Two-component system)

• Batch / MFG / EXP: see inkjet on packaging

For professional use only. Use with adequate ventilation and appropriate PPE.