Turean Polyurea Pool Waterproof Kit (2-Component Polyaspartic Polyurea Coating)

Overview

Turean Polyurea Pool Waterproof Kit is a two-component polyaspartic polyurea coating that cures into a seamless, flexible waterproof membrane. It’s designed for waterproofing systems in swimming pools and water features, and works well for crack sealing and waterproof lining applications—including underlayment preparation before tile or finish coats.

Key Benefits

• UV & weather resistant for outdoor environments

• Creates a seamless, crack-resistant membrane

• Strong adhesion on properly prepared substrates

• Supports waterproofing builds for wet-area performance

Recommended Uses

• Swimming pools & water features

• Crack sealing & waterproof lining

• Waterproof base layer before tile / finish coats

Mix Ratio

• 1:1 by weight (Part A : Part B)

• Measure accurately and mix thoroughly until uniform

• Do not allow settling after mixing

Application (Quick Directions)

1. Surface prep: grind/clean; remove dust & loose material; substrate must be dry

2. Apply sealing primer: wait 6–8 hours

3. Apply waterproof coating by roller / squeegee

   • Reference usage: ~0.6 mm ≈ 0.8 kg/m² (depending on substrate)

Important Notes

• No foot traffic within 48 hours

• Allow at least 7 days before full service

• If viscosity increases, add manufacturer-approved thinner (max 5–10%)

Storage & Shelf Life

• Store cool, dry, ventilated; recommended 0–30°C (32–86°F)

• Shelf life: 12 months (unopened)

What’s in the Kit

• Part A + Part B (Two-component system)

• Batch / MFG / EXP: see inkjet on packaging

For professional use only. Use with adequate ventilation and appropriate PPE.