Turean Polyurea Tile Overlay Kit — Dual Cartridge, 2-Component (1:1)

Overview

Turean Polyurea Tile Overlay Kit (Dual Cartridge) is a two-component polyaspartic polyurea coating in a twin/dual cartridge system for controlled dispensing and cleaner handling. It cures into a seamless, flexible waterproof membrane, designed for tile overlay waterproofing—especially in wet areas where upgrades are needed without tearing out existing tile.

Key Benefits

• Dual-cartridge format for cleaner, controlled dispensing

• Forms a seamless, crack-resistant waterproof membrane

• Strong adhesion on properly prepared substrates

• Ideal for wet areas and tile-detail zones (grout, corners, joints)

• Supports waterproof upgrades without demolition (when substrate is suitable)

Recommended Uses

• Bathrooms & kitchens (over existing tile when properly prepared)

• Grout lines, corners & joints

• Waterproofing upgrades and overlay applications before finish coats

Mix Ratio

• 1:1 by weight (Part A : Part B)

• Measure accurately and mix thoroughly until uniform

• Do not allow settling after mixing

Application (Quick Directions)

1. Surface prep: grind/clean; remove dust and loose material; substrate must be dry

2. Apply sealing primer: wait 6–8 hours

3. Apply waterproof coating by roller / squeegee

   • Reference usage: ~0.6 mm ≈ 0.8 kg/m² (depending on substrate)

Important Notes

• No foot traffic within 48 hours

• Allow at least 7 days before full service

• If viscosity increases, add manufacturer-approved thinner (max 5–10%)

Storage & Shelf Life

• Store cool, dry, ventilated; recommended 0–30°C (32–86°F)

• Shelf life: 12 months (unopened)

What’s Included

• Dual cartridge (Part A + Part B)

• Batch / MFG / EXP: see inkjet on packaging

For professional use only. Use with adequate ventilation and appropriate PPE.